| |
| |
| |
| Engine |
| Volvo Penta TAMD 162C Heavy duty |
| 6-cylinder, 4-stroke direct injected turbo-charged marine
diesel, fresh water cooled |
| 405Kw (550hp) |
| Propulsion |
| Model: Aquamaster 381 |
| Skrew diameter in nozzle 1050 |
| Hoister |
| Model: HIAB 225F-4, 19,5 m
hydraulic boom |
| Hull |
| Steel 16m*6m, draft 1,5 m. |
| Conveyor |
| Cutting Stainless stell self concentrating
width 4,5m |
| Store conveyor 100m3 |
| Dimensions |
| |
Hull |
Working |
| Length |
16,0m |
24,0m |
| Width |
6,5m |
6,5m |
| Height |
2,0m |
6,0m above water level |
| Weight |
23,0t |
44,0t |
| Cutting witdth |
|
4,5m |
| Portable cutting |
|
1,5m below water level |
| Depth |
|
1,0m above water level |
| Machines effectivness |
| 0,5-1 square kilometre/h |
| Speed 10 nots |
| Weights |
| Frame |
23t |
|
| Front conveyor |
2,5t |
|
| Store conveyor |
3,5t |
|
| Hiab crane |
4,0t |
|
| Engine |
2,0t |
|
| Fuel + tank, 3m3 |
3,5t |
|
| Propulsion |
2,0t |
|
| Capin (add.) + steering bridge |
1,5t |
|
| Other |
2,0t |
|
| TOTAL |
44,0t |
|
| Electric |
| 24 V, waterproof cables and components
of the whole wiring system, IP 64. |
| Hydraulics |
| Following systems are hydraulically driven: |
| •Weed cutting blades |
| •Front conveyor |
| •Store conveyor |
| •Propulsion |
| •Steering of the boat |
| •Crane |
| Front conveyor |
| Width 4,5m, lenght 9,3m |
| Hydraulic protection against overloading |
| Hydraulic driven, speed recude |
| Chains and lamellas |
| Working depth stepleesly adjusted +1,0..-1,5
meters |
| Conveyor and cutting blades are hydraulically
protected against collisions |
| - Optional for weed harvesting: one horizontal
and two vertical cutting blades, made of self-sharpening, hardened
special steel. |
| Store conveyor |
| Length |
17,0m |
|
| Width |
4,5m |
|
| Height |
1,3m |
|
| Volume |
100m3-115m3 (H=1,3m-1,5m) |
|
| Capacity |
40t |
|
| Chains and lames |
|
|
| Movement of conveyors steplessly
adjusted both directions electrically from operators seat. |
| Hull |
| For watertight compartments made ship building
steel grade A |
| Lenght |
16,0m |
|
| Width |
6,5m |
|
| Draft when loaded |
0,6m + propeller 1,4m |
|
| Painting and corrosion protection is based
to ship building technology. |
| Propulsion |
| Diameter |
1070mm |
|
| Width |
500mm |
|
| Material |
Stell |
|
| Speed |
6-10 knots (11-18 km/h) |
|
| Hydraulic stearing |
|
|
| Optional equipment |
| High-pressure water cleaner (30 litre/minute,
200 bar) as an additional equipment. |
| Air-conditioned cockpit version as an additional
equipment . |
| Special tools |
| N/A |
| Inspections |
| Technically accepted in all European Union
countries with the sign CE. Accepted to be used in water traffic by
the Finnish National Board of Navigation. Checked and accepted by
the labor protection authorities. Accepted stability tests. |
| |
| |
| |
|
